DIY Travel Wallet | Sonia’s Travels Collab | Sea Lemon

DIY Travel Wallet | Sonia’s Travels Collab | Sea Lemon


A travel wallet is a great to way keep all
those important things in one place during the time of travel so you can easily have
them on hand. I was inspired by Sonia from Sonia’s Travels
to come up with this simple travel wallet tutorial. She made a video on how to carry
your travel documents and has a really cool channel. It’s really fun to watch her travel
the world plus she does have helpful tips. So be sure to check out her travel wallet
video and subscribe to her channel. You can find those links in the description below. For this travel wallet, I decided to use craft
foam. Not only is this material super inexpensive for large sheets, but it comes in a variety
of colors you can find at almost all the major craft stores. And an added bonus, since it’s foam, it has
waterproof qualities. The design I made gives you an area for your
boarding pass on the left, with ID or other cards and passport pockets on the right. You can of course, alter this to make one
big pocket or any part to fit your needs. Here’s a list of materials and tools I’ll
be using to make one wallet. First, trim the foam sheet down to 15 by 9
inches (38 cm x 23 cm). You can mark your measurements with a dent rather than a pen
mark. Then score a line in the middle. If you don’t
have a bone folder to do this with, check out the description below for substitutes. Now score a line 4.5 inches (11.4 cm) away
from the center line on both sides. And then cut a 1.5 inch (38 mm) rectangle
off the top left flap. Now make a line 3 inches (7.6 cm) from the
top on the right flap. If you want your wallet to have round corners,
you can use a bottle cap to cut around. For the pocket flaps, fold them over, and
place the cap top onto the corner and cut around it. You can clean up the edges with
the x-acto if you need to. And please be careful when cutting, I don’t
like reading comments saying you cut your finger from watching my tutorial. So take
caution and cut carefully. After all that, your foam sheet should look
like this. And now I’m going to glue the flaps down to
form the pockets. I’m using a glue gun for this. If you want
to use a different glue, make sure it’s a really strong glue. Glue the left flap down on the bottom. This flap will eventually lay flat. Now on the right flap, glue a line on the
bottom, top and scored line. And now for the band. I’m using this 3/8 inch
elastic band. For more on elastic band sources and substitutes, check out this video here.
You can also find the link in the description below. If you don’t want to glue on an elastic band,
you could just wrap a rubber band or hair tie around it. To measure the amount of elastic band, wrap
it around, and slightly pull it so there is enough tension. You want it loose enough to
stretch over the wallet, but not too loose that it just hangs off of it. I cut mine to about 9.5 inches (24 cm). Now make a rough dent area in the center of
the wallet on the outside, about the width of your band. This little dent helps the glue
stick the band and foam together, making it stronger. Then glue the ends of the band to that area
in the center. Loop the band around like this to glue both
ends side by side. After that’s dry, you can swing it around
to close your new travel wallet. I will say that this material can get dented,
but if it’s light enough, amazingly the squishy foam material pops back up and the dents fade
away after an hour or so. You could use this to your advantage and impress
a design onto it. Just make sure you press hard enough, or else the design will fade
away. Another way to decorate your wallet, is to
cut pieces out of other foam colors and glue them on. I hope you found this tutorial helpful and
have fun making your custom travel wallet. Feel free to leave your comments below and
share pics of your finished wallets on my Facebook page, twitter or instagram. For more tutorials be sure to subscribe and
check out my channel. And be sure to check out Sonia’s video about travel wallets. For
more Sea Lemon you can find me on the links listed in the description below.

About the author

Comments

  1. Could you show how to do a traveler's purse?
    that could help me a lot to have my staff organized when I'm traveling.Thanks!!!๐Ÿ˜๐Ÿ˜๐Ÿ˜

  2. Yay, I got my passport recently and Im totally gonna do this! ๐Ÿ˜€ Question: Will you be making more crafts with Craft Foam? I have a lot of them.

  3. is glue gun strong enough for thicker foam boards? i accidentally bought a thick type and it works fine now, but im not sure about what would happen in the future.

  4. I love your channel! Your videos are sooo helpful for me. I'm doing them when I was bored. My favorite is the "How to make a book." Which you used perfect binding. Keep up the good work!

  5. Nice ideal, it makes it easier to keep doc's together. Thanks for sharing. Maybe you could make one for birth and marriage certificate.

  6. what is the thickness of the foam sheet that you have used?
    great DIY by the way!
    and which design school did you attend?

  7. Love this soooooo much! could this material be used for a midori????
    Could you do a video doing a midori with this material please!

  8. whoever comments that they cut their finger from watching your tutorial is weird, cutting yourself with an xacto knife is your fault, you are using a knife at your own risk!

  9. Hi Jennifer, do you think that this material can be used to make a DIY midori traveler's notebook or is it not strong enough? I saw your midori inspired book tutorial but I would like to have a thicker cover, so I though about foam.

  10. I watched the vinyl 'faux-dori' video and made a 3mm foam board 'dori with scrap paper signatures. I'm going to try a felt-backed vinyl version soon.

    The foam board 'dori holds up surprisingly well. I threaded my single long piece of elastic for three straps and a loop. I decided that I prefer a knot of the loop closure because it gives me something to grab when I pull it around to open or close it.

    I cut the fb short, but left it wide and threaded my elastic off-center, then folded the extra fb over the front cover, c-fold, then slip the closure loop over that.

  11. i don't think I can find this sheet here in Brazil, or it could be what we call here 'rubber paper', I can use it instead of the foam sheet?

  12. You can also give it a leather look by crumpling a piece of aluminium foil, flattening it back out, laying it over the foam (i recommend AFTER cutting. Personal experience), and ironing over it.

  13. I really enjoy your channel. Thank you!
    Do you think this material can be used for a case for an ipad ou e-reader? Did you try something similar?

  14. I never thought about craft foam. Actually, I think I'm going to try your Traveler's Notbook DIY using it instead of having to try to stiffen vinyl.

  15. I actually want to make this but I don't have the foam sheet and I live in Doha
    Can I have some substitutes๐Ÿ˜ฃ๐Ÿ˜„๐Ÿ˜‘๐Ÿ˜ฏ๐Ÿ˜“๐Ÿ˜ญ๐Ÿ˜ข๐Ÿ˜Ÿ

Leave a Reply

Your email address will not be published. Required fields are marked *